gomaco ft-3600 xtreme slipform paver

 The Xtreme GT-3600 is equipped with rotary-sensored slew drives, on each of the three tracks for extreme steering ability.

- The Xtreme GT-3600’s sensored All-Track Steering and sensored All-Track Positioning, make it the ultimate, intelligent slipform paver.

- The intelligent All-Track Positioning on the Xtreme GT-3600 includes a smart hydraulic cylinder on all three legs. The smart cylinders allow G+® to know the position of all three tracks and can make steering adjustments as needed.

 Smart cylinder sideshifting of the mold for repeatable mold offset.

- Intelligent off set is accomplished with a smart hydraulic cylinder for telescoping the mold mounting system. This provides G+ the ability for repeatable mold offset. The trimmerhead and mold have independent vertical adjustments for raising and lowering.

 Independent hydraulic travel control to each track allow G+ to control each individual track speed through a radius. 

 Pick your radius and G+ calibrates and manages all aspects of traveling around it on stringline, including track angles and individual variable track speeds.

- The G+ radius software for the control system allows the operator to program the size of the radius into the controller. As the Xtreme GT-3600 approaches the radius, with the values already dialed in, the operator activates the radius program, and the curb and gutter machine slipforms around the radius. It’s now easy for any operator to pour a radius.

 The Xtreme GT-3600 can pour a 24 inch (610 mm) radius.

- The Xtreme GT-3600’s G+ control system easily interfaces with stringline or a 3D guidance system for curb and gutter and tight radius applications.

- The Xtreme GT-3600 features the GOMACO three-sensor radius system for stringline. When paving with stringline, the lead steering wand is allowed to leave the stringline and reference is switched to sensor number two for traveling around the tight radius.

- Individual track speed control provides smooth machine travel around a radius.